Description

Type of Engine – Petrol

Mobil 1 0W-30 is engineered with a proprietary blend of high performance synthetic basestocks fortified with a precisely balanced additive component system. The low viscosity, fully synthetic formulation helps to increase engine efficiency and offers outstanding fuel economy. Mobil 1 0W-30 provides the high-temperature protection of 5W-30 and 10W-30 oils while offering improved fuel economy.

Key Features

Helps to improve fuel economy based on 0.2-2.3% potential fuel economy improvement obtained by switching from higher viscosity oils to a 0W-30 grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions and your current engine oil viscosity
Help to reduce oil aging resulting in long lasting protection
Quick cold weather starting and fast protection helps extend engine life
Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe, where a 5W-30, 10W-30 or 0W-30 is recommended

Applications

Mobil 1™ 0W-30 is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-30 meets or exceeds the requirements of the latest industry standards and outperforms our conventional oils.

Mobil 1 0W-30 is recommended by ExxonMobil for SAE 0W-30, 5W-30 and 10W-30 applications in all types of modern gasoline fueled passenger cars, SUVs, vans and light trucks.

Mobil 1 0W-30 is engineered to help deliver outstanding engine protection and improved fuel economy.
Mobil 1 0W-30 is recommended for extreme cold conditions to help deliver quick starts and fast lubrication.
Mobil 1 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

Typical Properties

SAE Grade	0W-30
Viscosity @ 100ºC, cSt (ASTM D445)	10.9
Viscosity, @ 40ºC, cSt (ASTM D445)	62.9
Viscosity Index	166
Phosphorous (ASTM D4951)	0.065
Sulfated Ash, wt%, (ASTM D874)	0.9
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683)	3
Flash Point, ºC (ASTM D92)	226
Pour Point, ºC (ASTM D97)	-50
Total Base Number (ASTM D2896)	9.1
MRV @ -40 ºC (ASTM D4684)	13,250
Density @15.6 ºC, g/ml (ASTM D4052)	0.842